Wall Sconces

Our sconces are not reproductions. All our wall sconces are rewired using UL listed replacement parts and tested. All electrical parts are of the highest standards to ensure safety and reliability. The sconces are priced to include the shades shown on the individual piece. We offer both old and new shades. Please e-mail or telephone for additional information. Telephone (905) 885-2344 or e-mail

Item # E sc 09047 A pair of Moe Bridges wall sconces circa 1931. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 8 inches in length, 5 inches wide and when mounted they will protrude from the wall 6.75 inches. As shown the pair is available for $485.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137151 A pair of solid brass, double armed sconces circa 1920.They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure, 11 inches in length, 9 inches wide and when mounted they would protrude from the wall 4 inches. As shown the pair is available for $445.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137152 A pair of double armed Markel sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows,11' inches in length,10 inches wide and when mounted they will protrude from the wall 5 inches. As shown the pair is available for $435.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137153 A pair of single armed Alwyn sconces circa 1934. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 8 inches in length, 4,25 inches wide and when mounted they will protrude from the wall 4 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137154 A pair of double armed iron sconces with the original copper wash finish circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11.5 inches in length, 10.5 inches wide and when mounted they will protrude from the wall 5 inches. As shown the pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137155 A pair of cast iron polychromed single armed sconces circa 1920. They measure, 11.5 inches in length, 4.25 inches wide and when mounted they would protrude from the wall 5.25 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc 137156 A pair of cast metal polychromed single armed sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 4 inches wide and when mounted they will protrude from the wall 4.25 inches. As shown the pair is available for $295.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137157 A pair of heavy iron sconces with a matt silver coloured finish circa 1919. This pair are very well modelled, the detail is very crisp. The measurements are as follows, 10 inches in length, 4 inches wide and when mounted they will protrude from the wall 4 inches. As shown the pair is available for $375.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137158 A pair of iron sconces with the original copper finish circa 1920. The backplates have a hammered finish and the ornament from which the arms emerge is well cast. The measurements are as follows, 11 long, 9.5 wide and when mounted they will protrude from the wall 4 inches. As shown the pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344/

Item # EC sc 137159 Two pair, 4 single armed Markel sconces fashioned in cast iron circa 1927. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 4 inches wide and when mounted they will protrude from the wall 4.25 inches. As shown the pair is available for $675..00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137161 A pair of double armed, polychromed, Moe Bridges wall sconces circa 1929. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 4 inches wide and when mounted they will protrude from the wall 4.25 inches. As shown the pair is available for $450.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137163 A pair of single armed Markel sconces circa 1920 with the original finish of old gold and pewter the pierced section above the arm is backed in a rich dark crimson. The measurements are as follows, 12.5 inches in length, 4.5 inches wide and when mounted they will protrude from the wall 5 inches. As shown this pair of sconces is available for $345.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 137164 We have two pair, four of these iron sconces circa 1930. They have press button switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 12 inches in length, 4.25 inches wide and when mounted they will protrude from the wall 6 inches. As shown the two pair. 4 sconces are available for $725.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 0721 A pair of single armed cast brass sconces circa 1920. The measurements are 7 inches wide, 11 inches in length and when mounted they will protrude from the wall 4.5 inches. As shown the pair is available for $365.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 0722 We have a pair of these double armed polychromed sconces on offer. The finish is original and in remarkable condition. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 9.5 inches in length, 7 inches wide and when mounted would protrude from the wall 3.25 inches. As shown they are available for $425.00 per pair plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 0724 A pair of cast metal polychromed two armed sconces circa 1920.They measure 8.5 inches in length, 10.5 inches wide and when mounted would protrude from the wall 5.5 inches. As shown the pair is available for $425.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 0725 A pair of cast iron polychromed single armed sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 8.5 inches in length, 10.5 inches wide and when mounted would protrude from the wall 5.5 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 05284 A pair of double armed sconces with Polychromed finish circa 1920. The detail is very crisp, fleur de lis, coronet and draped fabric accents in blue, pale yellow, gold and red. The sconces measure 10.5 inches in length, 11 inches wide and when mounted they will protrude from the wall 4.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair is available for $595.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 11016 A pair of circa 1920, double armed zinc alloy sconces. They have been polished. The measurements are as follows, 11 inches in length, 11 inches wide and when mounted they will protrude from the wall 4 inches. As shown the pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc02043 A pair of mirrored back, double armed, silver plated sconces. They measure 10 inches in length, 7 inches wide and when mounted they will protrude from the wall 3 inches. As shown the pair is available for $585.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 02044 A pair of silver plated solid brass sconces with a single arm circa 1920. The measurements are 5 inches wide, 9 inches in length and when mounted they will protrude from the wall 6.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 01152 A pair of mirrored back, brass single light sconces. They measure 12 inches in length, 4 inches wide and when mounted they will protrude from the wall 3 inches. They have pull chain switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 01142 We have three pair of these polychromed sconces on offer. The finish is original and in remarkable condition. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 11 inches in length, 11.5 inches wide and when mounted would protrude from the wall 3.75 inches. As shown they are available for $450.00 per pair plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 10224 A pair of two armed shield back sconces with cast arms and bobesche circa 1930. They are in a dark bronze finish. They are 11.5 inches in length, eight inches wide and when mounted will protrude from the wall 4.25 inches. As shown the pair is available for $475.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 10015 A pair of solid brass double armed sconces circa 1920. They are shown with the original silver plated finish. Measurements are 8 inches in length, 8 inches wide and when mounted they will protrude from the wall 6 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair is available for $545.00 plus shipping Questions? To order email or call 905-885-2344

Item # EC sc 10019 We have a pair these single armed cast brass sconces circa 1920. They are presented with the original aged brass finish. The measurements are 8 inches in length, 4.5 wide and when mounted they will protrude from the wall 6 inches. As shown each pair is available for $325.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12207 A pair of silver plate over cast brass double armed sconces. They measure 8 inches in height, 15.5 inches wide and when mounted they will protrude from the wall 8 inches. As shown the pair is available for $ 625.00 plus shipping. Questions? To order email or call 905-885-2344

Item # E sc 12208 A pair of polychromed gesso over carved wood sconces circa 1900. They measure 12 inches in height, 5 inches wide and when mounted they will protrude from the wall 7.5 inches. As shown the pair is available for $625.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12171 A pair of solid brass single armed sconces with a satin finish and shield shaped backplate circa 1910. The measurements are 4.5 inches wide, 8.5 inches in length and when mounted they will protrude from the wall 6 inches. As shown the pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12073 We have two pair of these cast brass double armed circa 1910 sconces available. They are cast brass and measure 12 inches in length, 6.5 inches wide and when mounted they will protrude from wall 3 inches. They are shown here without the original rotary switches but if needed they can be fitted with replacements. As shown each pair, is available for $650.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12076 A pair of single armed polished iron sconces with brass ornament in the centre of the backplate circa 1940. The sconces measure 10 inches in length, 4.5 inches wide and when mounted they will protrude from the wall 4.5 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12077 This pair of silver plated cast brass single armed sconces have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They are 11 inches long, 4.5 inches wide and when mounted would protrude from the wall 5.5 inches. As shown this pair of sconces is available for $525.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 11012 A pair of cast metal, single armed sconces with conquistador on the backplate. Original polychromed finish is in very good condition. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They are 12 inches long, 4.25 inches wide and when mounted would protrude from the wall 5.5 inches. As shown this pair of sconces is available for $475.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 09101 We have four pair of these single armed sconces on offer. Shown here with the original dark cream polychrome finish and nutmeg highlights. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 10 inches in length, 4 inches wide and when mounted they will protrude from the wall 3.5 inches. As shown the four pair, eight matching, are available for $1400.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 0218 A pair of cast brass1920s sconces with gothic detailing. They do not have rotary switches but we can add them so they can easily be used in applications where a wall switch is not present. The measurements are 7 inches high, 5 wide, and when mounted they will protrude from the wall 6 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc 04155 A pair of chrome plated single light sconces circa 1935. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They are offered either as shown with Edison based electric candle sockets or as originally intended to hold an Edison based bulb without candle sleeve. The candle socket allows the addition of a fabric shade in either a half or full shape should you wish to add shades. The sconces measure 8 inches in length, 3.5 inches wide and when mounted they will protrude from the wall 4.5 inches. As shown the pair is available for $295.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc 1014 A pair of single armed polished iron sconces circa 1930. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are 9 inches in length, 4 inches wide and when mounted they will protrude from the wall 4.5 inches. As shown the pair is available for $345.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc S 1108 A pair of 1920's Markel cast iron sconces. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They are 11 inches long, 4.5 inches wide and when mounted would protrude from the wall 5 inches. As shown the pair is available for $345.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SEM 102 A dark bronze, patinated, brass wall sconces circa 1910. The slag glass panelled shades open on the bottom. They are 12 inches in length, eight inches wide and when mounted would protrude from the wall 10 inches. This pair is available for $655.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc 281 We have one pair of these cast iron sconces. They have switches and can be used for applications where a wall switch is not present. They are 11 inches in length, have a 10 inch spread and when mounted would protrude from the wall 4.5 inches. As shown they are available for $445.00 plus shipping. Questions? To order email or call. 905-885-2344

EC sc MA 101 This pair of Machine Age sconces is 11 inches long, 10 inches wide and when mounted would protrude from the wall six inches. They have an aged copper finish. The detailing is very crisp. As shown the pair is available for $445.00 plus shipping. Questions? To order email or call. 905-885-2344

A pair of gas sconces made by Mitchell Vance in the 1870s Egyptian revival with correct fitters and shades 2& 5/8th inch. oxidised dark charcoal bronze with highlights. Back plates have been added and the sconce has been fitted for electricity. Ready to be installed by your electrician with no additions required. To view close ups of the figure and the gas valve please follow the links provided. The sconce is 10 inches at the tallest point, 7 inches at the widest and when mounted it will protrude from the wall 14 inches. The shades are frosted and have stars cut into the glass. As shown the pair is available for $2700.00 plus shipping. Questions? To order email or call 905-885-2344

Item # Psc 102301 This pair of white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The measurements of the sconces are 7 inches, the width five inches. As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # Psc 102302 This pair of 1930s white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The measurements of the sconces are 5 inches, the width five inches and when mounted they would protrude from the wall 4 inches. As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # Psc 102303 This pair of 1930s white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The measurements of the sconces are 5 inches, the width five inches and when mounted they would protrude from the wall 4 inches. As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # Psc 102304 This pair of 1930s white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The measurements of the sconces are 6 inches, the width 4.5 inches, As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SEP 08011 This pair of 1930s white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The measurements of the sconces are 7 inches, the width five inches and when mounted they would protrude from the wall 4 inches. As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SEP 08014 This pair of 1930s white deco porcelain sconces are shown with nickel plated end caps and were made by Pauling and signed.. Brass caps are available if preferred. The length of the sconces is 6.25 inches, the width 4 inches and when mounted they would protrude from the wall 3.75 inches. As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Items which have been sold.

Item # EC sc 09042 A pair of American Deco styled single armed sconces circa 1930.They measure, 12.5 inches in length, 5 inches wide and when mounted they would protrude from the wall 5.5 inches. They are signed L.A.P. Co. New York City. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call. 905-885-2344

Item # Gsc 09186 A pair of circa 1900, gas sconces fitted for electricity and shown with etched glass shades. They have the original period finish. Backplates have been colour matched and added when the fixtures were fitted for electricity. Cast brass details on the gas valves and connectors with rope twist tubing form these. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from seven inches (closed) to 16 inches (fully extended). Questions? To order email or call. 905-885-2344

Item # EC sc 12075 A pair of cast brass circa 1910 sconces. To view the embossed detailing on the arms follow this link. This pair of single armed sconces measure 11 inches in length, 3.5 inches wide and when mounted they will protrude from the wall 7 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Shown here with the original aged brass finish. The pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344

Item # E sc 12206 We have four of these, two pair, solid brass sconces with the original aged brass finish circa 1920.Shown here with Artisanal, American art glass, replacement shades of Pearl iridescent glass lined with gold iridescent and decorated with gold iridescent pulled feather in a tulip shape. They measure 11 inches in length, 10.5 inches wide and when mounted they will protrude from the wall 7.25 inches. As shown each pair of the double armed sconces is available for $1500.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 01143 A pair of solid bronze two armed sconces circa 1910, shown with the original finish. The measurements are 15.5 long, 9.25 wide and when mounted they will protrude from the wall 5 inches. The backplates make this pair ideal for mounting on a bookcase or mirror or other application where a narrow backplate is required. As shown the pair is available for $625.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 011194 A pair of solid brass two armed sconces circa 1910, shown with the original finish. The measurements are 11 long, 8.25 wide and when mounted they will protrude from the wall 5.5 inches. The backplates (3.5'') make this pair ideal for mounting on a bookcase or mirror or other application where a narrow backplate is required. As shown the pair is available for $425.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 07292 We have a pair of these cast solid bronze two armed sconces circa 1910. They do not appear to be signed but they should be. The detail is very crisp. They measure 11.5 inches in length, 9.5inches wide and when mounted would protrude from the wall 4.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc 137162 A pair of single armed iron sconces made by Lincoln shown here with polychromed finish. They have press button switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 4.5 inches wide and when mounted they will protrude from the wall 5 inches. Questions? To order email or call 905-885-2344

Item # G sc 02048 This pair of circa 1900 gas sconces has been fitted for electricity and is shown with period deeply etched shades. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with decorated tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees. The sconce will protrude from the wall from seven inches (closed) to 26 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 12 inches. As shown the pair is available for $625.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # Gsc 09184 This pair of 1900 converted gas sconces are shown with etched Greek Key patterned shades. The length is 10 inches the width 7.5inches and when mounted they would protrude 12 inches from the wall, as shown. The pair is available for $375.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc 01151 A pair of bronze two armed sconces circa 1910, shown with the original finish. The measurements are 13.5 long, 12 wide and when mounted they will protrude from the wall 3.5 inches. If required they can be fitted with pull chain switches which would allow them to be used without the presence of a wall switch. The detail is very crisp. As shown the pair is available for $725.00 plus shipping. Questions? To order email or call 905-885-2344

Item # Esc 09187 A pair of early electric articulated single arm sconces shown with the original Japanned finish circa 1900. Shown here with period acid etched coloured shades in a soft daffodil yellow. We kept the original socket shells and just replaced the electrical components inside the sockets. They have period like paddle switches. Even the shade holders are original to these sconces and appear with the matching Japanned finish and even the daisy head screws. This pair is available for $895.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12191 A pair of signed Champion double armed cast metal sconces circa 1920. A pair of matching single armed sconces is also available. The measurements are 12 inches in length, 10 inches wide and when mounted they will protrude from the wall 4 inches. As shown the pair is available for $465.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 12192 A pair of signed Champion single armed cast metal sconces circa 1920. A pair of matching double armed sconces is also available. The measurements are 12 inches in length, 5.25 inches wide and when mounted they will protrude from the wall 5.25 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 05286 A pair of nickel plated over bronze sconces with armorial detail. They measure 12 inches in length, 11.5 inches wide and when mounted will protrude from the wall 3 inches. . Questions? To order email or call 905-885-2344

Item # EC sc 137165 A pair of cast iron single arm wall sconces circa 1920. They have press button switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 14 inches in length, 4.25 inches wide and when mounted they will protrude from the wall 4 inches. Questions? To order email or call 905-885-2344

Item # SEP 09046 This pair of white porcelain sconces have facetted bulb holders with the detail repeated on the rotary switch knobs. The rotary switches will make it possible to use these in a situation where a wall switch is not present. They can, of course, be used with a wall switch too. They are 7.5 inches long, 4.25 inches wide and when mounted they would protrude 3.5 inches from the wall. As shown they are available for $245.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # Esc 07291 A pair of signed Halcolite single armed cast sconces with acid etched period shades circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 12 inches in length, 3.5inches wide and when mounted would protrude from the wall 6 inches. As shown they are available for $525.00 per pair plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 04134 A pair of solid brass, double armed sconces circa 1920.They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure, 6 inches in length, 9 inches wide and when mounted they would protrude from the wall 4 inches. As shown the pair is available for $345.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc S 1012 Silver plated cast brass sconces circa 1910. Shown here with beeswax sleeves. The sconces measure 9 inches in length, 2.75 inches wide and when mounted they will protrude from the wall 4.5 inches. As shown the pair is available for $425.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SEP 217 This pair of white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The length of the sconces is 7 inches, the width five inches and when mounted they would protrude from the wall 4.5 inches.

Item # E sc 09081 ON hold Two pair of Lightmaster wall sconces circa 1936. Shown with the original hobnail fonts and clear and frosted shades. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 14 inches in length, 5.25 inches wide and when mounted they will protrude from the wall 5 inches.

Item # EC sc 0723 We have a pair of these single armed polychromed sconces on offer. A matching pair of double armed sconces are shown above.. The finish is original and in remarkable condition. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 9.5 inches in length, 4.5 inches wide and when mounted would protrude from the wall 4.5 inches. As shown they are available for $325.00 per pair plus shipping. Questions? To order email or call 905-885-2344

Item # SEP 0727 This pair of white deco porcelain sconces have green line detailing and are shown with nickel plated end caps. Brass caps are available if preferred. The length of the sconces is 6 inches, the width 3.75 inches and when mounted they would protrude from the wall 4 inches. As shown they are available for $235.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SEP 08013 This pair of white deco porcelain sconces made by Pauling and signed are shown with nickel plated end caps. Brass caps are available if preferred. The length of the sconces is 6 inches, the width 4 inches and when mounted they would protrude from the wall 3.5 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 09085 A pair of solid brass sconces with beaded detail on the backplate. They measure, 9 inches in length, 4.25 inches wide and when mounted they would protrude from the wall 5.25 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 11011 A pair of double armed, cast metal sconces with the original polychromed finish. Five matching pair of single armed sconces are available in a different finish. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They are 10 inches long, 8.25 inches wide and when mounted would protrude from the wall 3.25 inches.

Item # ED sc 02031 A pair of slipper shaded sconces with original polychromed finish and acid washed cast glass amber coloured shades circa 1920. We have a matching five light fixture available. The sconces measure 10 inches in length, seven inches wide and when mounted they will protrude from the wall 3.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair of sconces is available for $625.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # EC sc 12081 A pair of solid brass single armed sconces circa 1920. The measurements are 11 inches in length, 4.25 wide and when mounted they will protrude from the wall six inches. As shown the pair is available for $325.00 plus shipping. Here is an image of this sconce with a silk shade. Questions? To order email or call 905-885-2344

Item # EC sc 1015 A pair of solid brass single armed sconces circa 1930. They are 7 inches long, 3.5 inches wide and when mounted they would protrude 4.5 inches from the wall. As shown the pair is available for $295.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SG201 This pair of 1900 converted gas sconces are shown with original inverted shade holders fitted with new Fenton swirl pattern cranberry shades. The length is 9 inches the width 8 inches and when mounted they would protrude 12 inches from the wall, as shown. As shown the pair is available for $395 plus shipping. One pair is available at this time.

Item # EC sc 02041 We have a pair these single armed solid brass sconces circa 1920. They are presented with the original aged brass finish. The measurements are 9 inches in length, 4.5 wide and when mounted they will protrude from the wall 7 inches. As shown the pair is available for $295.00 plus shipping. Questions? To order email or call 905-885-2344

Item # Esc 011193 We have a pair of these cast brass sconces available. They are shown here with stalactite French double etched shades. The finish is aged brass. They measure 12 inches in length, 5 inches wide and when mounted would protrude from the wall nine inches. As shown a pair is available for $525.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 0728 A pair of two armed silver over cast brass sconces circa 1910. They measure 8.5 inches in length, 9 inches wide and when mounted will protrude from the wall 5 inches. As shown the pair is available for $685.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 07210 A pair of two armed silver over solid brass sconces circa 1920. They measure 9 inches in length, 8.5 inches wide and when mounted will protrude from the wall 4.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair is available for $575.00 plus shipping. Questions? To order email or call 905-885-2344

Item # GE sc 07213 A pair of circa 1900 Gas/Electric sconces which are fitted for electricity on both the gas and electric outlets. A backplate has been colour matched and added when the fixture was fitted for electricity. Shown here with an aged brass finish and Greek Key patterned shades. Questions? To order email or call. 905-885-2344

Item # EC sc 09044 A pair of cast bronze single armed sconces shown with the original patinated finish and highlights. Very crisp details. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure, 8.5 inches in length, 4.75 inches wide and when mounted they would protrude from the wall 7 inches. As shown the pair is available for $525.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # SEP 08012 This pair of white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The switches will make it possible to use these in a situation where a wall switch is not present. They can, of course, be used with a wall switch too. The measurements of the sconces are 8 inches, the width five inches and when mounted they would protrude from the wall 4 inches. As shown they are available for $245.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # Gsc 09185 This pair of 1900 converted gas sconces are shown with etched Greek Key patterned shades. To view the gas valve detail and rope twist arm which form this pair follow this link. The length is 10 inches the width 7.5inches and when mounted they would protrude 12 inches from the wall, as shown. Questions? To order email or call. 905-885-2344

Item # EC sc 10014 A pair of solid brass two armed sconces with pierced work surrounding the backplate and candle cups. They are shown with the original aged brass finish. They measure 8.5 inches in length, 10.5 inches wide and when mounted would protrude from the wall 5.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc 01141 We are pleased to offer two pair of these sconces circa 1910. They are pierced and have hand wrought ornaments on the backplates. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 12 inches in length, 11.5 inches wide and when mounted would protrude from the wall 5 inches. The finish is original. Questions? To order email or call 905-885-2344

Item # Gsc 09183 This pair of circa 1900 gas sconces has been fitted for electricity and is shown with etched shades. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with rope twist tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees. The sconce will protrude from the wall from 7.25 (closed) to 25 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 11.5 inches. Questions? To order email or call. 905-885-2344

Item # Esc 05031 A pair of copper wash slipper shaded sconces with original period frosted shades circa 1930. They measure 10 inches in length, 5 inches wide and when mounted they will protrude from the wall five inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown a pair is available for $525.00 plus shipping. Questions? To order email or call 905-885-2344

Item # EC sc 10017 A pair of solid and cast brass single armed sconces circa 1920. The measurements are 8 inches in length, 4 1/8 wide and when mounted they will protrude from the wall 6 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # EC sc 011201 A pair of single armed sconces circa 1919 shown with curved panelled slag glass shades. They have flat paddle key switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The length of the sconces is 10 inches the spread is 4.25 and they will protrude from the wall when mounted 7 inches Questions? To order email or call 905-885-2344

Item # EC sc 01141 Two pair of these sconces circa 1910 have been sold. They are pierced and have hand wrought ornaments on the backplates. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 12 inches in length, 11.5 inches wide and when mounted would protrude from the wall 5 inches. The finish is original. Questions? To order email or call 905-885-2344

Item # EC sc 09182 A pair of cast metal polychrome double armed sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 8.5 inches in length, 10.5 inches wide and when mounted would protrude from the wall 3.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc 04152 A pair of cast bronze, single armed sconces with polychrome on armorial details circa 1925. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure, 9 inches in length, 5..5 inches wide and when mounted they would protrude from the wall 5.5 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 011191 We have two pair of these solid bronze heraldic sconces. They have the original pull chain switches complete with little brass tassel pulls. The pierced backplates show a lion rampant, a unicorn, a crown and thistles. The cups have crenulated tops. The pierced backplate has a polychrome plate which is now black. The colour of this plate could be changed should you wish to do so. The pull chain switches allow these to easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 10 inches in length, 10 inches wide and when mounted they will protrude from the wall 5 inches. Questions? To order email or call 905-885-2344

Item # Gsc 03021 open details follow the second image, below. Questions? To order email or call. 905-885-2344 Please call for clarification of the rather wordy description that follows.

Item # Gsc 03021 closed We are pleased to offer this double armed, two joint, pair of circa 1870 gas sconces fitted for electricity and shown with etched shades. The shades have a wreath and torch design. This pair of circa 1870 gas sconces has been fitted for electricity and is shown with etched shades. The shades have a wreath and torch design. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with square tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees at the second joint. The sconce will protrude from the wall from nine inches (closed) to 28 inches (fully extended). When fully extended to either side as shown above the spread is 45 inches. The measurement from the top of the shade to the bottom of the backplate is 11 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 011192 A pair of solid brass two armed sconces circa 1920, shown with the original aged brass finish. The measurements are 11 long, 9.5 wide and when mounted they will protrude from the wall 3.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # EC sc 07211 We have a pair of these spelter single light sconces. They have Edison based sockets and would have originally been polychromed. The painted finish was past saving so we have just stripped them and lightly polished them to produce this pewter like appearance. Questions? To order email or call 905-885-2344

Item # EC sc 12172 A pair of silver plated solid brass sconces with a single arm circa 1920. The measurements are 4.75 inches wide, 10 inches in length and when mounted they will protrude from the wall 5.5 inches. . Questions? To order email or call 905-885-2344

Item # EC sc 02042 We have a pair of these cast brass, silver plated double armed sconces with cameo. They measure 8 inches in length, 9 inches wide and when mounted they will protrude from the wall five and three quarter inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # EC sc 05283 We have a pair of these Lincoln polychromed sconces. They are 11 inches in length, 9 inches wide and when mounted they will protrude from the wall 3 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # Esc 09181 A pair of sconces with aged brass details shown with period ribbed glass shades circa 1930. To view a similar sconce without the shade follow this link. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The sconces measure 8 inches in length, 4.5inches wide and when mounted they will protrude from the wall 6.5 inches.

Item # EC sc 05282 We have two pair of these polychromed, single armed sconces. They measure 10 inches in length, 4.5 inches wide and when mounted they will protrude from the wall 5 inches. As shown each pair is available for $295.00 plus shipping. Questions? To order email or call 905-885-2344

Item # Esc 05281 A pair of copper wash slipper shaded sconces with original period frosted shades circa 1930. They measure 10 inches in length, 5 inches wide and when mounted they will protrude from the wall five inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # SEP 0726 This pair of white porcelain sconces have porcelain switch knobs and little glass shades. The switches will make it possible to use these in a situation where a wall switch is not present. They can, of course, be used with a wall switch too. They are 7.5 inches long, 4. inches wide and when mounted they would protrude 4.5 inches from the wall. Questions? To order email or call. 905-885-2344

Item # Gsc 07212 This pair of circa 1900 gas sconces has been fitted for electricity and is shown with etched shades. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with rope twist tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees. The sconce will protrude from the wall from seven inches (closed) to 22 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 12 inches. Questions? To order email or call. 905-885-2344

Item # G sc 02049 A pair of circa 1900, gas sconces fitted for electricity and shown with period pressed glass shades. They have the original period finish. Backplates have been colour matched and added when the fixtures were fitted for electricity. Cast brass details on the gas valves and connectors with rope twist tubing form these. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from seven inches (closed) to 16 inches (fully extended). Questions? To order email or call. 905-885-2344

Item # G sc 09049 This pair of circa 1900 gas sconces has been fitted for electricity and is shown with acid etched shades. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with square tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees. The sconce will protrude from the wall from seven inches (closed) to 26.75 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 12 inches. Questions? To order email or call. 905-885-2344

Item # G sc 02047 A pair of circa 1900, gas sconces fitted for electricity and shown with period glass shades. They have the original period finish. Backplates have been colour matched and added when the fixtures were fitted for electricity. Cast brass details on the gas valves and connectors with rope twist tubing form these. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from eight inches (closed) to 16 inches (fully extended). Questions? To order email or call. 905-885-2344

Item # Esc 020410 A pair of single armed sconces circa 1910 shown here with Artisanal, American art glass, replacement shades of gold iridescent glass in a daffodil shape. The sconces have cast two part shade holders and beaded backplates. The finish is both bronze and aged brass as found. The sconces have flat key switches and can be used in situations where a wall switch is not present. The can of course, be used with a wall switch too. The measurements are 12 long, 5 wide and when mounted they will protrude from the wall 8 inches. Questions? To order email or call 905-885-2344

Item # Esc 076 A pair of solid brass sconces which pivot from the wall to either side and have a ball joint above the socket to provide more adjustment possibilities. Shown with American made gold iridescent art glass shades. The sconces have pull chain sockets so they can be used without a wall switch. The mounting bracket is two inches wide. The sconces can be raised or lowered seven inches, pivot 180 degrees and the shade can also be angled by using the ball joint above the decorative husk which hides the socket. Questions? To order email or call. 905-885-2344

Item # E sc 090412 A pair of single arm sconces shown with the original aged brass finish and Bohemian blown glass shades. An additional plate allows the backplate to be wide enough to cover a modern electrical box. The measurements are as follows, 11 inches in length, 6.5 inches wide and when mounted they will protrude from the wall 14 inches. Questions? To order email or call 905-885-2344

Item # G sc 11212 We have two pair, four of these, circa 1900, gas sconces fitted for electricity and shown with acid etched shades. They have the original period finish. A backplates have been colour matched and added when the fixtures were fitted for electricity. Cast brass details on the gas valves and connectors with rope twist tubing form these. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from seven inches (closed) to 15 inches (fully extended). Questions? To order email or call. 905-885-2344

Item # EC sc 04154 A pair of Polished Chromium sconces made by Chase Brass and Copper Company, Waterbury Connecticut. Illustrated in the 1934 Lighting fixtures Catalogue as ''The Newport''. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Some light surface scratches but the chrome plate is in very good condition. They measure 7.5 inches in length, 4.25 inches wide and when mounted will protrude from the wall 2.75 inches. Questions? To order email or call. 905-885-2344

Item # SEP 01144 This pair of white porcelain sconces are offered with original white glass shades circa 1930. The rotary switches will make it possible to use these in a situation where a wall switch is not present. They can, of course, be used with a wall switch too. They are 8 inches long, 4.75 inches wide and when mounted they would protrude 4 inches from the wall. Questions? To order email or call. 905-885-2344

Item # EC sc 12082 A pair of cast brass double armed sconces circa 1910. They are 15 inches in length, 11 inches wide and when mounted will protrude from the wall seven inches. They retain the original aged brass finish. Questions? To order email or call 905-885-2344

Item # EC sc 12201 A pair of solid brass single armed sconces 1940. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The sconces measure 6 inches in length, 5.5 inches wide and when mounted they will protrude from the wall 2.25 inches. Questions? To order email or call 905-885-2344

Item # Esc 02061 We have a pair of these single armed, shaded sconces circa 1910. The period shades are white bisque with blown out details which echo the pattern on the solid brass sconces. The measurements are 12 inches in length, 4.25 wide and when mounted they will protrude from the wall 6 inches. Questions? To order email or call 905-885-2344

Item # EC sc 12202 We have six of these solid brass, single armed sconces with original aged brass finish circa 1920. They measure 12 inches in length, 5.75 inches wide and when mounted they will protrude from the wall 6.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # Esc 02045 A pair of sconces with nickel details shown with period iridescent glass shades circa 1930. To view the sconce without the shade follow this link. The sconces measure 8 inches in length, 4.5inches wide and when mounted they will protrude from the wall 6.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc S 04151 A pair of cast bronze silver plated sconces circa 1920.They measure, 10 inches in length, 4 inches wide and when mounted they would protrude from the wall 6 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 09045 A pair of solid brass sconces with embossed bell flower detail on the backplate. They measure, 10 inches in length, 4.5 inches wide and when mounted they would protrude from the wall 5 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 10011 A pair of cast metal double armed sconces circa 1930. They are shown with the original dark pewter coloured finish. Measurements are 10 inches in length, 9 inches wide and when mounted they will protrude from the wall 3 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They are ideally suited for use in a narrow hallway thanks to the profile. Questions? To order email or call 905-885-2344

Item # EC sc 10012 We have three pair, six of these cast bronze sconces circa 1927 available. They are shown with the original aged brass finish. Measurements are 11 inches in length, 10 inches wide and when mounted they will protrude from the wall 4.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # EC sc 11017 A circa 1920, pair of double armed, brass sconces shown with their aged brass finish, stylized foliage adorn the backplates and bobesche. The measurements are as follows, 11 inches in length, 11 inches wide and when mounted they will protrude from the wall 4 inches. Questions? To order email or call 905-885-2344

Item # EC sc 10016 We have a pair of these solid brass single armed sconces circa 1920. The measurements are 9.5 inches in length, 4.25 wide and when mounted they will protrude from the wall 5.75 inches.

Item # G sc 09122 This pair of circa 1900 gas sconces has been fitted for electricity and is shown with period shades. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valves and arm backs form this pair. The sconces can pivot 180 degrees from left and right just above the valve. The sconce will protrude from the wall from seven and a half inches (closed) to 15 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 10 inches.

Item # G sc 09124 This set of three circa 1900 gas sconces has been fitted for electricity and is shown with new pressed glass shades. They retain the original period finish. The length is 12 inches the width 5.25 inches and when mounted they would protrude 11 inches from the wall. The backplates are original but have been enlarged to cover a modern electrical box.

Item # E sc 12204 A pair of machine age sconces with the original glass shades. They can be mounted either as shown or with the shades up as shown here. The measurements are 7.5 inches in length, 4.25 inches wide and when mounted they will protrude from the wall 4.25 inches. Questions? To order email or call 905-885-2344

Item # SEP Pink A matching ceiling fixture is also available. This pair of pink deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The length of the sconces is 9 inches, the width four inches and when mounted they would protrude from the wall four inches. Questions? To order email or call. 905-885-2344

Item # EC sc 12203 We have a pair and a spare of these double armed sconces circa 1920. They are shown with the original aged brass finish. Measurements are 9 inches in length, 8.25 inches wide and when mounted they will protrude from the wall 4 inches. As shown the pair is available for $525.00 plus shipping. Should you wish to purchase the matching third sconce the total would be $645.00. Questions? To order email or call 905-885-2344

Item # EC sc 01251 A pair of solid brass double armed sconces circa 1920. They are shown with the original aged brass finish. Measurements are 10 inches in length, 10.5 inches wide and when mounted they will protrude from the wall 8 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. As shown the pair is available for $525.00 plus shipping Questions? To order email or call 905-885-2344

Item # EC sc 09086 A pair of cast brass, single armed 1920s sconces. They do not have rotary switches but if you wish, we can add them so they can easily be used in applications where a wall switch is not present . The measurements are 7 inches high, 5 wide, and when mounted they will protrude from the wall 6 inches. As shown the pair is available for $325.00 plus shipping. Questions? To order email or call. 905-885-2344

Item # E sc M 01252 A pair of signed Tungstolier solid brass sconces circa 1912. The shades are four panelled caramel slag glass and solid brass. The sconces measure 11 inches in length, five inches wide and when mounted they will protrude from the wall 10.5 inches. They have flat key switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # EC sc 100110 We have a pair these single armed, silver plated, cast brass sconces circa 1920. The measurements are 9 inches in length, 4.25 wide and when mounted they will protrude from the wall 6 inches. Questions? To order email or call 905-885-2344

Item # EC sc 10018 We have a set of four of these single armed solid brass sconces circa 1930. They have cast brass ornaments and are shown with the original aged brass finish. The measurements are 8.5 inches in length, 4.5 wide and when mounted they will protrude from the wall 6.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc 10013 A pair of solid brass double armed sconces circa 1920. They are shown with the original aged brass finish. Measurements are 14 inches in length, 9 inches wide and when mounted they will protrude from the wall 5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # E sc 090411 A pair of solid brass sconces shown with American made gold iridescent daffodil shaped replacement shades. They have flat key switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 4 inches wide and when mounted they will protrude from the wall 6 inches. Questions? To order email or call 905-885-2344

Item # G sc 11214 This pair of gas sconces circa 1900, has been fitted for electricity and is shown with acid etched shades. The sconce has the original period finish. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with rope twist tubing form this pair. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from seven inches (closed) to 15 inches (fully extended).Questions? To order email or call. 905-885-2344

Item # EC sc 11015 A pair of single armed iron sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 9 inches in length, 5 inches wide and when mounted they will protrude from the wall 5.25 inches. Questions? To order email or call 905-885-2344

Item # EC sc 09082 A pair of two arm sconces with nail head detail on the backplates. The measurements are as follows, 12 inches in length, 11 inches wide and when mounted they will protrude from the wall 6 inches. Questions? To order email or call 905-885-2344

Item # EC sc 0410 A pair of cast bronze, circa 1920 sconces with the original polychromed finish. Presented with linen fold detailing on the back plate and bobesche. The measurements are 11.5 inches long, 10 inches wide and when mounted they will protrude from the wall 4.25 inches. Questions? To order email or call. 905-885-2344

Item # G sc 11211 This pair of circa 1900 gas sconces has been fitted for electricity and is shown with acid etched shades. The sconce has the original period finish, aged brass. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with square tubing form this pair. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from seven inches (closed) to 15 inches (fully extended). Questions? To order email or call. 905-885-2344

Item # EC sc 077 A pair of two arm cast metal 1930s sconces with a dark mahogany coloured finish. The measurements are 10 inches high, 9.5 inches wide, and when mounted they will protrude from the wall 3.5 inches. Questions? To order email or call. 905-885-2344

Item # E sc 12205 We have three of these double armed bronze and brass sconces circa 1910. They have flat key switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Shown here with Artisanal, American art glass, replacement shades of gold iridescent glass in a daffodil shape. They measure 14 inches in length, 11 inches wide and when mounted they will protrude from the wall 8 inches. Questions? To order email or call 905-885-2344

Item # G sc 09048 This pair, of circa 1900, gas sconces has been fitted for electricity and is shown with acid etched shades. The sconce has the original period finish. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with rope twist tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees. The sconce will protrude from the wall from seven inches (closed) to 24 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 10 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 320 This pair of three arm sconces have swan head arm backs. As shown they are 10 inches long, 16 inches wide and when mounted would protrude from the wall 16 inches. Questions? To order email or call. 905-885-2344

Item # G sc 090410 This pair circa 1900 gas sconces has been fitted for electricity and is shown with acid etched shades. The sconce has the original period finish, a dark oil rubbed bronze. A backplate has been colour matched and added when the fixture was fitted for electricity. Cast brass details on the gas valve and connectors with square tubing form this pair. The sconces can pivot 180 degrees from left and right just above the valve and again almost 360 degrees. The sconce will protrude from the wall from seven inches (closed) to 26.75 inches (fully extended). The measurement from the top of the shade to the bottom of the backplate is 11.5 inches. We do have a third matching sconce available if required. Questions? To order email or call. 905-885-2344

Item # Esc 10155 A pair of solid brass sconces circa 1910. Shown with period shades. The measurements are 11 inches in length, 6 inches wide and when mounted they will protrude from the wall 10 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 1215 A pair of 1920s iron single arm sconces. They are 11.5 inches long, 5 inches wide and when mounted they would protrude 4.5 inches from the wall. Questions? To order email or call. 905-885-2344

Item # EC sc 12074 A pair of double armed solid brass Lightolier sconces circa 1920. They measure 9 inches in length, 8.5 inches wide and when mounted they will protrude from the wall 6 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Shown here with the original aged brass finish. Questions? To order email or call 905-885-2344

Item # E sc 01255 A pair of solid brass sconces shown with cased glass shades circa 1930. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The sconces measure 10 inches in length, six inches wide and when mounted they will protrude from the wall 6.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc 12071 A pair of signed Halcolite single armed cast brass sconces circa 1920. The casting is very crisp. They are shown here without the original rotary switches but if needed they can be fitted with replacements. The sconces measure 10.5 inches in length, 4 inches wide and when mounted they will protrude from the wall 4.5 inches. Questions? To order email or call 905-885-2344

Item # E sc 01254 We have three of these single armed sconces circa 1910 shown with period shades Nuart in Marigold carnival glass crystal satin. Crystal satin was frosted by hand on the exterior only. The iridescence on this set of shades is very vivid. The sconces have flat key switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The sconces measure 13 inches in length, five inches wide and when mounted they will protrude from the wall 7 inches. Questions? To order email or call 905-885-2344

# E sc 01253 We have a pair of single armed sconces circa 1900 offered with two choices of period shades. The acid etched pair with cranberry stain shown above or if you prefer, a pair of diamond quilted shades with a bright daffodil colour which can be seen here. The sconces have cast brass ''figurehead'' arm backs and foliate detailing on the arms. The sconces have flat key switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The sconces measure 10.5 inches in length, five inches wide and when mounted they will protrude from the wall 16.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc N 04152 A pair of cast bronze, circa 1910 sconces with the original nickel finish with small gilded details. Presented with linen fold detailing on the back plate and bobesche. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are 9.5 inches long, 9.5 inches wide and when mounted they will protrude from the wall 5.5 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 12193 A pair of double armed, solid brass mission style sconces circa 1910. Shown with the original aged brass finish. The measurements are 12 inches wide, 8 inches in length and when mounted they will protrude from the wall 6.5 inches. Questions? To order email or call 905-885-2344

Item # EC sc 12072 We have three pair of these cast metal, single armed sconces with polychrome finish circa 1930. They measure 12 inches in length, 5 inches wide and when mounted they will protrude from the wall 5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call 905-885-2344

Item # EC sc 1217 two pair of polished iron sconces. The sconces are 9 inches in length, 5 inches wide and when mounted they will protrude from the wall 4.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call. 905-885-2344

Item # EC sc 2109 A pair of 1930s, two arm, cast metal sconces with the original finish which resembles hand forged iron. They are 11 inches long, 12 inches wide and when mounted will protrude from the wall 3.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can, of course, be used with a wall switch too. Questions? To order email or call. 905-885-2344

Item # EC sc 071 A pair of 1920s iron single arm sconces They have rotary switches so they can easily be used in applications where a wall switch is not present. They can, of course, be used with a wall switch too. They are 11 inches long, 4.5 inches wide and when mounted they would protrude 6.5 inches from the wall. Questions? To order email or call. 905-885-2344

Item # EC sc 09253 A pair of double armed iron sconces made by Lincoln shown here with their original polychromed finish. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 8 inches wide and when mounted they will protrude from the wall 4 inches. Questions? To order email or call 905-885-2344

Item # EC sc 09251 A pair of 1920's cast bronze single armed sconces with polychromed coat of arms detail. They measure 18 inches in length, five inches wide and when mounted they will protrude from the wall five inches. They are signed Whitacre. Questions? To order email or call 905-885-2344

Item # EC sc 09043 A pair of cast bronze double armed sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are 13 inches long, 10.25 inches wide and when mounted they will protrude from the wall 4.25 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 04156 A pair of two arm cast metal 1930s sconces with the original copper wash finish. The measurements are 8.5 inches high, 9 inches wide, and when mounted they will protrude from the wall 3.5 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 1106 A pair of French cast brass sconces with a bronze finish. They are 12 inches long, 6.5 inches wide and when mounted they would protrude 7 inches from the wall. They have been fitted with chandelier sockets. Questions? To order email or call. 905-885-2344

Item # EC sc 075 A pair of 1920s, two arm, cast metal sconces with the original finish. They are 10 inches long, 9.5 inches wide and when mounted will protrude from the wall 5.25 inches. Questions? To order email or call. 905-885-2344

Item # EC sc 1115 A pair of 1920s iron single arm sconces with the original copper wash finish. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can, of course, be used with a wall switch too. They are 9 inches long, 4.25 inches wide and when mounted they would protrude 6 inches from the wall. Questions? To order email or call. 905-885-2344

Item # EC sc 1116 A pair of 1920s cast metal single arm sconces. They are 10 inches long, 4 inches wide and when mounted would protrude from the wall 6 inches. Questions? To order email or call. 905-885-2344

Item # E sc 09252 We have two pair of these single armed iron sconces made by Lincoln shown here with their original polychromed finish. A matching pair of double armed sconces are also available. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are as follows, 11 inches in length, 4.5 inches wide and when mounted they will protrude from the wall 5 inches.

Item # EC sc 074 We have two pair of these single armed sconces with stars on the backplates. Made in America circa 1930.They have rotary switches so they can easily be used in applications where a wall switch is not present. They can, of course, be used with a wall switch too. The measurements are 7.75 inches high, 4.5 wide, and when mounted they will protrude from the wall 5 inches. . Questions? To order email or call. 905-885-2344

Item # EC sc 05122 A pair of iron single armed sconces circa 1920. They measure 12 inches in length, four inches wide and when mounted they will protrude from the wall 4.5 inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. Questions? To order email or call. 905-885-2344

Item # SEP 114 This pair of white deco porcelain sconces are shown with nickel plated end caps. Brass caps are available if preferred. The length of the sconces is 8 inches, the width five inches and when mounted they would protrude from the wall four inches.

Item # EDI 05121 We have three pair of these slipper shaded sconces circa 1920. The frames are cast iron with the original copper wash finish. They measure 13 inches in length, six inches wide and when mounted will protrude from the wall five inches. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too.

Item # SEP 216 A pair of white porcelain sconces circa 1920. They have switches which retain the original porcelain pulls. The measurements are 7.25 inches long, 5 inches wide and when mounted they would protrude from the wall 4.25 inches. Since they have switches, they can easily be used in situations where a wall switch is not present. They can also be used with a wall switch. Questions? To order email or call. 905-885-2344

Item # EC sc 04131 We have two pair of these solid brass sconces circa 1920 with the original aged brass finish. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure, 8 inches in length, four inches wide and when mounted they would protrude from the wall six inches.

Item # EC sc 04157 We have two pair of these cast brass, silver plated double armed sconces made by Crescent Brass circa 1910. They measure 12 inches in length, 7.75 inches wide and when mounted they will protrude from the wall four inches.

Item # EC sc 1003 A pair of double armed brass and iron sconces circa 1920. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can, of course, be used with a wall switch too. They are 8.5 inches long, 8.5 inches wide and when mounted they would protrude 5 inches from the wall. Questions? To order email or call. 905-885-2344

Item # EC sc B04161 A pair of cast bronze slipper shaded sconces circa 1930. Shown here with the original two toned glass shades. The sconces have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. They measure 9.5 inches in length, 5.5 inches wide and when mounted they will protrude from the wall 7 inches. The frames are cast bronze not iron with a wash or white metal. These are among the best of slipper shaded sconces produced in the second quarter of the 20th Century.

Item # Esc 4124 A pair of cast brass sconces circa 1910 with double etched Vianne shades. The sconces are 14 inches in length, 5.5 inches wide and when mounted they will protrude from the wall 10 inches.

Item # EC sc 10212 A pair of Markel sconces circa 1920 with knight's helmet detailing the back plate. They have rotary switches so they can easily be used in applications where a wall switch is not present. They can of course be used with a wall switch too. The measurements are 12 inches in length, 8.5 inches wide and when mounted they will protrude from the wall 2.5 inches.

Item # EC sc 2103 This pair of cast brass, circa 1910 sconces would be ideal for mounting on a bookcase or mirror or other application where a narrow backplate is required. Please view the larger image to view the cast ornament. The sconces are seven inches wide, 11 inches long and when mounted would protrude from the wall 3 inches.

Item # Gsc 101 This pair circa 1900 gas sconces has been fitted for electricity and is shown with inside acid etched shades. Cast brass details on the gas valve and connectors. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from four inches (closed) to 14 inches (fully extended).

Item # Gsc 103 This pair circa 1900 gas sconces has been fitted for electricity and is shown with inside acid etched shades. Rope twist arms with cast brass details on the gas valve and connectors. The sconces can pivot 180 degrees from left and right. The sconce will protrude from the wall from seven inches (closed) to 15 inches (fully extended).

Lightolier, one of the oldest lighting companies in America. Founded in 1904 in the Bowery section of New York City by Austrian immigrant Bernhard Blitzer, Lightolier has illuminated America's homes and workplaces for a hundred years. Their advertising slogan was ''After sunset Lightolier''.

Work is ongoing. If you are looking for something specific, please feel free to e-mail vintage@vintagelighting.com